|
Josh wants to lower ET Revision 3 |
|
|
|
|
With the Camaro running the 355 last night (9/28/2006) Josh ran 9.96 with wheel spin, it has more and the weather or the track wasn't its best! *********************************************************** Update 12/09/2006: 60ft 1.299
330 3.997
1/8 6.258
1/8 mph 108.63
1000 8.221
1/4 9.895
1/4 mph 134.22
********************************************************************** Well Josh realized four tenths of a second quicker and 130 plus MPH was more than the old truck could handle. One weekend of low ten second ETs was enough to sell him on a new race car. With a certified Camaro chassis, it looks like Josh is headed for 9 second ETs! Josh said " Before the grooves, I had to change the oil every 20 passes, now it runs clean!" 
Josh runs a S10 pickup with a 355 SBC; he's looking to step up the pace at the drag strip by the tune of four tenths of a second quicker. A complete new engine is in the plans with ported RHS heads, Singh's grooves and a new camshaft from Bullet racing cams. Stay tuned for all the details.  Image by cody polage; cool flashpics http://www.coolflashpics.zoomshare.com/ 
Only registered users can write comments.
Please login or register. |
Just wanted to say hi!
Written by Hal on 2010-02-08 22:40:52
What is up everyone? My name is Jessica. I am from Slovakia. I am new to the forum and just wanted to say hi.. I hope I posted this in the right section on your forum... [url=http://somender-singh.com/?8c61a40e8e14f611e2216c8b797]http://somender-singh.com/?8c61a40e8e14f611e2216c8b797[/url], | Just wanted to say hi!
Written by Jen on 2010-01-21 21:11:14
What is up everyone? My name is Jessica. I am from Slovakia. I am new to the forum and just wanted to say hi.. I hope I posted this in the right section on your forum... [url=http://somender-singh.com/?f1e2357c80b83f07259f155e9a7]http://somender-singh.com/?f1e2357c80b83f07259f155e9a7[/url], | Written by automotive breath on 2006-08-02 17:47:54
Thanks,
I developed the groove with help from Somender. My first attempt was done with a hack saw blade, lately I use a ball end mill finishing with a hand held file.
| Written by stockersarewaycool on 2006-08-01 19:06:12
This deal is sweet. Automotive breath I like your work and I like the design of the grooves! | Impressive
Written by Guest on 2006-08-01 15:41:55
This is like wow!!
Totally impressive. Hope it works out |
Powered by AkoComment 2.0! |
::click!::